Table of Contents
Advertisement
2.4 Printing on Special Media
2.4.4
Printing on Glossy paper
Glossy paper must be fed one at a time from the manual tray.
You can use the following media with DocuPrint C621:
• Mylar film (157 g/m
• NK double-sided art paper
The procedure on how to print on glossy paper is as follows.
54
)
2
If media other than those mentioned above are used, paper jams may
result.
Lift the A3 oversize guide and make sure that
the paper guide matches with the paper size
scale.
Insert the paper gently into the feeding slot of
the manual tray, with the side to be printed
face-up.
Load glossy paper one sheet at a
time. If you load more than one
sheet, moisture between the
paper may cause them to be fed
into the printer together, causing
paper jams.
Once the glossy paper is set properly, send a
print command from your application software.
Specify the items shown in the next section
"Printer Driver Settings (when printing on
glossy paper)" in the printer driver.
Advertisement
Table of Contents
