Table of Contents
Advertisement
1.2
What is the DP/ASi Link?
Definition
The DP/ASi link connects the actuator sensor interface (ASi) to the PROFI-
BUS-DP field bus. In doing so, the protocols of the bus systems are conver-
ted.
Overview
The DP/ASi link belongs to the Distributed I/O.
The DP/ASi link is a DP slave. In addition, other components belong to the
DP/ASi link. Not all components are necessarily required for operation:
Components
Bus cable incl. power supply cable
Figure 1-2
Master interface
The DP/ASi link can be operated, for example, with the following master
interface module and COM ET 200 version:
Characteristics
The DP/ASi link has the following characteristics:
Distributed I/O System DP/ASi Link
EWA 4NEB 710 6055-02b
T connector
Power supply connector
Programmer connector
Bus cable
Power supply cable
Terminating resistor
Adapter cable
Components
IM 308-C (version 1 or later)
COM ET 200 Windows (version 2.0 or later).
IP 66/IP 67 degree of protection
The DP/ASi link is installed in degrees of protection IP 66 and IP 67.
When assembling, note that IP 66/IP 67 is insured only when you follow
the rules on installation set out in section 4.1.
Compact design
The DP/ASi link is suitable for applications requiring little space. Its di-
mensions are 205 80 57 mm plus the T connector.
Overview
PS
SV
cntr
PG
2-core
3-core
5-core
1-3
Advertisement
Table of Contents
