Table of Contents
Advertisement
Table C-1
Byte(s)
6
1
Station status
The station status defines the operating behavior of the DP/ASi link as a DP
slave. Its behavior towards other DP masters is determined; other aspects to
be determined are whether the SYNC and FREEZE modes and the watchdog
are being used.
Table C-2
0 to 2
3
4
5
6, 7
Distributed I/O System DP/ASi Link
EWA 4NEB 710 6055-02b
Structure of the DP standard part in parameterization message, continued
Value
Group ID
You can place several DP slaves in one group with the
group ID.
Refer to Table C-3 for the watchdog time base
Structure of station status in parameterization message
Bit(s)
Value
000
Reserved
1
The watchdog for the PROFIBUS-DP is enabled in the
DP/ASi link.
1
The DP/ASi link can be operated in FREEZE mode.
1
The DP/ASi link can be operated in SYNC mode.
00
The slave response time (T
parameters remain as they are.
01
The DP/ASi link is enabled for other PROFIBUS ma-
sters.
10
The DP/ASi link is disabled for other PROFIBUS ma-
sters. All parameters are applied; (exception:
T
0).
SDR
11
The DP/ASi link is enabled for other PROFIBUS ma-
sters.
Parameterization Message
Meaning
Meaning
) is modified. All other
SDR
C-3
Advertisement
Table of Contents
Need help?
Do you have a question about the SIMATIC Distributed I/O System DP/ASi Link and is the answer not in the manual?