Operating The Dp/Asi Link With An External Master - Siemens SIMATIC Distributed I/O System DP/ASi Link Manual

Configuring the DP/ASi Link
5.3

Operating the DP/ASi Link with an External Master

Introduction
If you do not use an application having an easy-to-use user interface for the
DP/ASi link – for example, COM ET 200 Windows (version 2.0 or later) or a
comparable application, you must pay attention to the following points.
In Section
5-6
5.3.1 Configuring with Address Space Optimization
5.3.2 Simple Configuration
5.3.3 Default Start-Up
You Will Find
Distributed I/O System DP/ASi Link
EWA 4NEB 710 6055-02b
on Page
5-7
5-8
5-9