A.1 Standards And Approvals - Siemens SIMATIC Distributed I/O System DP/ASi Link Manual

Technical Data
A.1 Standards and Approvals
Introduction
This chapter contains for the distributed I/O system DP/ASi link data concer-
ning
IEC 1131 The distributed I/O system DP/ASi link meets the requirements and criteria
of IEC Standard 1131, Part 2.
PROFIBUS DP
The distributed I/O system DP/ASi link meets the requirements and criteria
of EN Standard 50170 Volume 2, PROFIBUS.
ASi standard The distributed I/O system DP/ASi link meets the requirements and criteria
of the ASi standard.
CE mark
Our products meet the requirements and protective goals of the following EC
Directives and conform to the harmonized European standards (EN) publis-
hed for programmable logic controllers in the official journals of the Euro-
pean Community:
The EC conformity declarations are made available for the cognizant authori-
ties at:
A-2
the most important standards whose criteria are met by the DP/ASi link
and
approvals for the DP/ASi link.
89/336/EEC "Electromagnetic Compatibility" (EMC Directive)
73/23/EEC "Electromagnetic Equipment for Use within Specific Voltage
Limits" (Low-Voltage Directive)
Siemens Aktiengesellschaft
Bereich Automatisierungstechnik
AUT E 14
Postfach 1963
D-92209 Amberg
Distributed I/O System DP/ASi Link
EWA 4NEB 710 6055-02b