Standards, Certificates And Approvals - Siemens SIMATIC HMI Mobile Panel 277 RO Operating Instructions Manual

Safety instructions and general notes

2.2 Standards, certificates and approvals

2.2 Standards, certificates and approvals
Approvals
Only the approvals on the rear are valid
The following overview shows possible approvals.
The only valid approvals for the HMI device and the connection box itself are those shown
on the label on the rear panel.
CE approval
The HMI device and the connection box satisfy the requirements and protection objectives of
the following EC directives. The HMI device and the connection box comply with the
harmonized European standards (EN), promulgated in the Official Journals of the European
Community for programmable controllers:
● 2004/108/EC Electromagnetic Compatibility Directive (EMC Directive)
● Directive 2006/42/EC of the European Parliament and Council dated 17 May 2006, on
machinery, and amending Directive 95/16/EC (revised version)
EC Declaration of Conformity
The EC Declarations of Conformity are available to the relevant authorities at the following
address:
Siemens AG
Digital Factory
Factory Automation
DF FA AS DH AMB
Postfach 1963
D-92209 Amberg
UL approval
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
SIBE Switzerland Certification Service
The HMI device and the connection box satisfy Category 3 PL d in accordance with
EN ISO 13849-1:2008/AC:2009.
The enabling device safety function for special operation control and the STOP button satisfy
the following requirements:
● Category 3 PL d according to EN ISO 13849-1:2008/AC:2009
● Requirements of EN 60204-1:2006, under compliance with the safety instructions
detailed in the operating instructions
IEC 61131
The HMI device meets the requirements and criteria according to IEC 61131-2,
Programmable Controllers, Part 2: Equipment requirements and tests.
22
CAUTION
Operating Instructions, 10/2015, A5E36824256-AA
Mobile Panel 277 RO