Avaya IP Office Installation Manual page 246

Digital Station Module Connections
Ports Description
DC I/P DC power input port. Used for connection of the power lead from an Avaya 40W external power
supply unit supplied with the expansion module. A locale specific
external PSU is required but is not supplied with the module.
DS Digital Station port. Used for connection of IP Office
If connected to an
barrier devices in addition to the buildings primary protection. The module must also be connected to
a protective ground.
DTE 25-Way D-Type socket. For Avaya use only.
EXPANSION RJ45 Socket. Used for direct connection to an Expansion port on an IP Office control unit using the
Expansion Interconnect cable supplied with the module.
Ground point. Used for connection of a
where this screw is not present, the top-center cover screw should be used instead.
Must be connected if any
All expansion modules are supplied with a base software level and should be upgraded to match the core software of the
control unit in the IP Office system.
Item
IP400 Digital Station
IEC60320 C7 Power Cord
IP400 Rack Mounting Kit
Expansion modules include an external power supply unit (PSU) and an appropriate interconnect cable. They do not
include a locale specific power cord for the external PSU or any phone extension cables.
IP Office Installation
IP Office
out-of-building extension, the connection must be made via additional IROB
protective or functional ground
out-of-building extensions
Variant
16 Ports
30 Ports
CEE7/16
BS1363
NEMA1-15
Korea
China
IEC60320 C7 power cord
supported DS phones.
are connected to this module.
Country SAP Code
All 700184807
700184880
Europe 700213382
United Kingdom 700213374
America 700213390
Korea 700254519
China 700314172
All 700210800
15-601042 Issue 19l (06 November 2008)
for the
if required. On older modules
Page 246