Ip403 - Avaya IP Office Installation Manual

11.1.5 IP403

This section is included for maintainer information only. This unit is not supported on IP Office 4.0 and higher.
The front panel of the IP403 control unit includes eight digital extension (DS) ports, two analog phone (POT) ports and an
eight port 10/100Mbps Ethernet LAN hub. The IP403 has been superseded by the IP406 V2 control unit. IP403 control
units with integral DT rather than DS ports are also supported up to 3.2, however use of devices on those ports is not
supported.
Feature
Maximum Extensions 100 of various types in combination. Analog only: 92. DS only: 98. IP only: 100.
Conference Parties
Trunks Cards
VCM Card Slots
Data Channels
Locales
Software Level
Power Supply
Mounting
Dimensions
Weight
Maximum
Configuration Size
IP Office Installation
IP Office
Capacity
64.
2 Trunk card slots. All types supported except Dual PRI trunk cards.
1 up to maximum voice compression channels capacity of 20 channels.
20 of which 10 usable for Voicemail Pro/TAPI WAV connection sessions (subject to available
Voicemail Pro Port and TAPI WAV licenses).
Supported in all IP Office locales.
· IP Office core software level 1.0 minimum.
· Bin file = ip403.bin.
· DT Port Support: IP Office 3.0 and higher software does not support the use of DT ports.
IP403 DT modules are supported on IP Office 3.0 but use of the integral DT ports is not
supported.
The unit is supplied with a 2-Pin, 40W external power supply unit. The PSU has an integral
power cord for connection to the unit's DC I/P socket. A locale specific IEC60320 C7 power
cord for the external PSU is required but is not supplied with the unit.
The unit is designed as a free-standing module that can be stacked on or under other IP Office
modules. The unit can be rack mounted in a 19" rack system using the optional Rack Mounting
Kit.
Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8".
Unboxed: 2.5Kg/5.8lbs. Boxed: 3.85Kg/8.6lbs.
192KB.
15-601042 Issue 19l (06 November 2008)
Page 222