Adding External Expansion Modules - Avaya IP Office Installation Manual

7.15 Adding External Expansion Modules

Each module is supplied with an expansion connect cable and a
cord for the power supply unit, and
Warnings
1. No cable other than an Expansion Interconnect cable should be used. Use of any alternate cable will lead to system
failure.
2. External expansion modules are not supported by an IP500 control unit running in Express Edition mode.
Installation Requirements
1. o Installation space either on or under the existing IP Office control unit.
2. o Switched power outlet socket.
3. o Free EXPANSION port on the rear of the control unit.
4. o The control unit must have a valid IP500 Upgrade Standard to Professional license.
5. o Grounding Requirements
5.1.o Functional Grounding
Connection of a functional ground
· o Recommend for all modules.
· o Connection of a functional ground is mandatory for Analog Trunk module.
5.2.o Protective Grounding
Connections of a protective ground via
· o Mandatory for Analog trunk modules in the Republic of South Africa.
· o Mandatory for Digital Station and Phone modules connected to out of building extensions.
· o Mandatory for Digital Station V2 and Phone V2 modules.
Tools Required
1. o Manager PC.
2. o Tools for rack mounting
IP Office Installation
IP Office
External expansion modules connect to the IP Office control unit using a blue 1
meter (3'3'') expansion interconnect cable supplied with the modules.
Objective - Connect the external expansion modules and then restart the
control unit so that the new modules are recognized.
cables for the ports on the front of the module must be ordered separately.
is:
surge protection equipment
(optional).
IP500 Basic Installation: Adding Licences
power supply unit. An appropriate
is:
15-601042 Issue 19l (06 November 2008)
locale specific power
Page 145