Digital Station V2 - Avaya IP Office Installation Manual

11.6.2 Digital Station V2

The IP400 Digital Station V2 (also known as DS V2) is used to add additional DS ports to an IP Office system. The DS V2
is available in 16 and 30 port variants, referred to as DS16 V2 and DS30 V2 respectively.
The DS V2 supersedes the original IP400 Digital Station, now referred to as a DS V1. The module version is indicated by
labels both the base and the rear of the module. Key changes are:
· The DS ports have been rotated 180° to allow easier connection access.
· The port status LED's have been moved and grouped adjacent to the ports.
· The DTE serial port on the rear of the module has been changed to a 9-pin D-type socket.
· The DS V2 uses an earthed 3-pin 60W external power supply unit.
Feature Details
Supported on All IP Office control units except Small Office Edition. Use on the IP Office 500 control unit
requires the unit to be configured with an IP500 Upgrade Standard to Professional license.
Locales Supported in all IP Office locales.
Software Level IP Office core software level 2.1(31) minimum. Bin file = nadcpV2.bin.
Included Power supply unit (see below) and Expansion Interconnect cable.
Power Supply The module is supplied with a Earthed 3-Pin, 60W external power supply module. The PSU has an
integral power cord for connection to the module's DC I/P socket. A locale specific
power cord
Mounting The module is designed as a free-standing module that can be stacked on or under other IP Office
modules. The module can be rack mounted in a 19" rack system using the optional IP400 Rack
Mounting Kit.
Dimensions Width: 445mm/17.5". Depth: 245mm/9.7". Height: 71mm/2.8"/2U.
Weight Unboxed: 3.5Kg/7.8lbs. Boxed: 4.8Kg/10.8lbs. (Based on DS30 V2)
IP Office Installation
IP Office
for the external PSU is required but is not supplied with the module.
System Components: IP400 Expansion Modules
15-601042 Issue 19l (06 November 2008)
IEC60320 C13
Page 243