Environmental Conditions; Before Applying Power; Table 2-1 Environment Requirements - Agilent Technologies E6198B User Manual

WA RNING
WA RNING

Environmental Conditions

C A U T I O N

Before Applying Power

E6198B Switch/Load Unit User Manual
DO NOT REMOVE RACK PANELS OR INSTRUMENT COVERS. Operating
personnel must not remove any rack panels or instrument covers.
Component replacement and internal adjustments must be made only
by qualified service personnel. Products that appear damaged or
defective should be made inoperative and secured against unintended
operation until they can be repaired by a qualified service personnel.
The protection provided by the Agilent TS-5000 system may be
impaired if the system is used in a manner not specified by
Agilent.
The Automotive Electronics Functional Test System is designed
for indoor use only.
requirements.

Table 2-1 Environment Requirements

Environment Conditions
Maximum Altitude
Temperature (Operation)
Maximum Relative Humidity
This product is designed for use in Installation Category II and
Pollution Degree 2, per IEC 61010-1.
Verify that the product is set to match the available line voltage
and all safety precautions are taken. Note the external markings
of the instruments described in
Regulatory Markings".
Safety and Regulatory Information
Table 2-1 shows general environmental
Requirements
2000 meters
5 C to 40 C
The test system is designed to operate
in the range from 5% to 80% relative
humidity (non-condensing).
"Safety Symbols and
2
2-3