Connecting Loads; Load Wiring; Figure 5-48 Agilent N9377A Connectors J1/J2 And Mating Connectors J1/J2 - Agilent Technologies E6198B User Manual

Connecting Loads

Figure 5-48 Agilent N9377A Connectors J1/J2 and Mating Connectors J1/J2

J1
Mating
Connector
for J1
Mating
Connector
for J2
J2

Load Wiring

E6198B Switch/Load Unit User Manual
Loads are mounted externally and connected to the load card
via wires or cables. The loads are wired to connectors which
mate to the Agilent N9377A's J1 and J2 connectors,
respectively. Figure 5-48
Loads 1 through 8 connect to the J1 connector and loads 9
through 16 connect to the J2 connector. Each pin is rated for 2A
continuous. The following figures show details to help you
correctly wire loads to the connectors.
• Figure 5-49 shows a load wiring schematic.
• Figure 5-50 shows the connector pin layout.
• Figure 5-51 shows the connector pinouts for J1 and J2.
Using Load Cards and Loads
shows these connectors.
K317
K316
K318
K319
K321
K320
K322
K323
K325
K324
K327
K326
K328
K329
K331
K330
5
P1
P2
5-69