5
Using Load Cards and Loads
Current Sharing
5-22
Notice in the wiring schematic
E in each row of J1 are connected together on the PC board.
When connecting high-current (>3 amp) loads, wire across all
three pins in each row of P1 (see
current sharing across all pins and prevents premature pin
failure from excessive current flow.
Figure 5-15 Agilent E6175A Current Sharing Example
Load 1
Load 2
(Figure
5-14) that pins A, C and
Figure
5-15). This ensures
P1 Connector
(Wiring Terminal View)
Row 16
Row 1
A
C
E
E6198B Switch/Load Unit User Manual
Load 7
Load 8