Table of Contents
Advertisement
6
Using the Pin Matrix Cards
SHOCK HAZARD. Only service-trained personnel who are
WA RNING
aware of the hazards involved should install, remove, or
configure the Switch/Load Unit or plug-in cards. Before you
remove any installed card, disconnect AC power from the
mainframe and from other cards that may be connected to
the cards.
STATIC ELECTRICITY. Static electricity is a major cause of
C A U T I O N
component failure. To prevent damage to electrical
components, observe anti-static techniques whenever
removing a card from the Switch/Load Unit or whenever
working on a card.
J1 Connector Pinouts
Figure 6-5
shows the pinouts for connector J1 which provides
instrument and Abus access. J1 is available only on the Agilent
E8792A 32-Pin Matrix Card.
E6198B Switch/Load Unit User Manual
6-9
Advertisement
Table of Contents
