Agilent E6178B 8-Channel 30 Amp Load Card Register Definitions - Agilent Technologies E6198B User Manual

B
Register Definitions

Agilent E6178B 8-Channel 30 Amp Load Card Register Definitions

B-28
• Write Only
• State: 1 = NO shorted to COM, NC is open; 0 = NC shorted to
COM, NO is open
• Power On/Reset State = 0
The Agilent E6178B following Features:
• Fuse protected at 30A (slow blow),
• 8 loads with individual current sensing,
• Flyback protection can be added for each load,
• 30 Amp continuous current on one channel at a time.
See "Using the Agilent U7177A 24-Channel Load Card"
information.
Card Type (R) (Base + 00
This register reads back the Card Type (04
Bit
Purpose
Setting
Card Configuration (R) (Base + 01
This register reads back the Card Configuration. The Card
Configuration is determined by the user (using J2) to
distinguish different load configurations of the same load board
Card Type. When unused, a read of this register will be FF
Bit Bit 7
Card Configure (R) J2-10
)
h
7-0
Card Type
04 h
)
h
Bit 6 Bit 5 Bit 4
J2-9 J2-8 J2-7
E6198B Switch/Load Unit User Manual
for more
) of the card.
h
.
h
Bit 3 Bit 2 Bit 1 Bit 0
J2-5 J2-4 J2-3 J2-2