Installing And Removing Mezzanine Cards; Figure 5-56 Agilent N9378A Load Mounting Area And P1/J1 Connectors - Agilent Technologies E6198B User Manual

Installing and Removing Mezzanine Cards

E6198B Switch/Load Unit User Manual

Figure 5-56 Agilent N9378A Load Mounting Area and P1/J1 Connectors

Loadx.1
Loadx.2
Loadx.3
Loadx.4
Load(x+6).4
Load(x+6).3
Load(x+6).2
Load(x+6).1
x = channel numbers 1, 3, 5, 13, 15, or 17
The mezzanine cards are held to the load card by the friction of
the connector at the top and bottom. When installing a
mezzanine card, apply even pressure to both top and bottom
connectors to ensure good contact.
When removing a load card, you may need an appropriate
prying tool to loosen the card from the connectors, especially
when multiple cards are installed. Use the indentations on the
sides of the card to loosen the card with the prying tool, then
grasp the card and gently rock it back and forth until it is free of
the connectors.
Mezzanine card IDs
1 3 4
2
J12 J14
J11 J13
TOP
AGILENT
J15 J17
J18
J16
Using Load Cards and Loads
MEZZ ID
Load(x+1).1
Load(x+1).2
Load(x+1).3
Load(x+1).4
Load(x+7).4
Load(x+7).3
Load(x+7).2
Load(x+7).1
5
5-81