E6198B Switch/Load Unit User Manual
Example B (available only as a special configuration) shows two
isolated power supplies with separate grounds connected to the
power bus. This configuration can be used if, for example, one
supply requires local sensing, while the other requires remote
sensing at the UUT.
Figure 4-6 Example B: Isolated Power Supplies
V
BATT
For the standalone SLU, users can directly connect to the
external connector "DC Power Bus Connection". See
Figure 4-7 DC Power Bus Connector Of Standalone SLU
Power Bus 1
PB Sense 1
PB Sense 2
Configuring the Switch/Load Unit
V
UUT
Power Bus 2
Power Bus 3
4
PB1
PB2
PB3
PB4
Figure
4-7.
Power Bus 4
PB Sense 3
PB Sense 4
4-7