Creating A Scsi Controller Driver Diskette; Creating An Emergency Repair Disk; Installing Driver Software; Installing Qfe Software - Intergraph Zx10 5U System Manual

The network controller driver software is in a folder on the system's driver CD. First see the
. file for information on creating a driver diskette using the
README TXT
Then see the
MS
operating system Control Panel. Keep the driver diskette for use if you have to reinstall the
operating system.

Creating a SCSI Controller Driver Diskette

If you reinstall the operating system, you must install the SCSI controller driver software from
diskette. You cannot install it from the system's driver CD.
The SCSI controller driver software is in a folder on the system's driver CD. Copy the contents of
the version number folder (including any folders beneath it) to diskette. If you have to reinstall the
operating system, use this diskette when asked for the SCSI controller driver software.

Creating an Emergency Repair Disk

If you did not create an Emergency Repair Disk during Setup, you should do so after completing
Setup and configuring the system. See the operating system documentation and Help for
information on creating an Emergency Repair Disk.
You can use the files on the Emergency Repair Disk to restore the contents of the operating system
registry and the standard operating system driver software. You should update the Emergency
Repair Disk frequently, especially after adding or changing system hardware or software.

Installing Driver Software

Driver software (or drivers) for system components and peripheral devices was installed before
shipment. You received a CD with your system that contains these drivers. Keep the driver CD in
case you have to reinstall drivers or the operating system later.
Because of production timing, drivers for your system may have been revised after your system
shipped from the factory. You should check Intergraph Computer Systems' online services for the
latest versions of your system's drivers. If a later version of a driver is available, you can
download it and install it on your system; keep it on diskette in case you need to reinstall it later.
See the Preface of this document for information on the online services, and see the
delivered with a driver for installation instructions.

Installing QFE Software

Quick-Fix Engineering (QFE) software contains fixes for operating system problems or limitations;
these fixes are required for proper operation of your system. QFE software, when required, is
delivered on the system's driver CD, and additional QFE software may be delivered on diskette. If
. file for information on installing the driver software using Network in the
TXT
. program.
MAKEMS BAT
file
README
17