Going Through Setup - Intergraph Zx10 5U System Manual

5u rack-mount
Table of Contents

Advertisement

If the system is connected to a network that uses the Transmission Control Protocol/Internet
Protocol (TCP/IP), get and record the appropriate TCP/IP information for your system from your
network administrator:
Internet Protocol (IP) address:
IP subnet mask:
IP domain name for your network:
IP address for your network's default gateway:
IP addresses for Domain Name System (DNS)
servers, if any:
IP addresses for Windows Internet Name
Service (WINS) servers, if any:
The operating system delivery media contain software and drivers for both Reduced Instruction Set
Computing (RISC)- and Intel-based systems. When installing operating system software, make
sure you install it from the \

Going Through Setup

386 directory on the delivery media.
I
Power Button
CAUTION
If you start the system and then
turn it off before completing
operating system Setup, you will
have to reinstall the operating
system and associated system
software.
CAUTION
Before starting the system for the
first time, you may want to learn
more about system power,
startup, and shutdown. See
Chapter 4, "Operating Notes," for
this information.
To start (apply full power to) the system for
the first time, press the Power button on the
front of the base unit.
15

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Zx10 5U and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents