Exit Menu - Intergraph InterServe 9000 System Reference Manual

Table 20. Boot Menu
Feature
Floppy Check
Multi-boot Support
Boot Device Priority
Hard Drive
Removable Devices
Maximum Number of intelligent
input output (I O) Drives
2
Message Timeout Multiplier
Boot Device Priority Submenu
Use the up- or down-arrow keys to select a device. Press the <+> or <-> keys to move the device
higher or lower in the boot priority list.
Table 21. Boot Device Priority Submenu
Boot Priority
1.
2.
3.
4.
Hard Drive Submenu
For options on this menu, use the up or down arrow keys to select a device. Press the <+> or <->
keys to move the device higher or lower in the boot priority list.
Table 22. Hard Drive Submenu
Option
1. Drive #1 (or actual drive string)
2. Other bootable cards
(additional entries for each drive that
has a PnP header)

Exit Menu

You can make the following selections on the Exit Menu. Select an option using the up or down
arrow keys. Press <Enter> to run the option. Pressing <Esc> does not exit this menu. You must
select one of the items from the menu or menu bar to exit.
Choices
Disabled
Enabled
Disabled
Enabled
N/A
N/A
N/A
1
4
1, 2, 8, 10,
50, 100, 1000
Device Description
Diskette Drive Attempts to boot from drive A.
Removable Devices Attempts to boot from a removable media device.
Hard Drive Attempts to boot from a hard drive device.
ATAPI CD-ROM Drive Attempts to boot from an ATAPI CD-ROM drive.
Description
N/A
Covers all the boot devices that are not reported to the
system BIOS through the BIOS boot specification
mechanism.
Description
If Enabled, system verifies diskette type on boot.
Disabled results in a faster boot.
Enable this option only if the total number of hard
drives is less than eight.
Enters submenu.
Enters submenu.
Enters submenu.
Selects the maximum number of I
a DOS drive letter.
All timeout values are multiplied by this number.
O drives assigned
2
43