Advanced Menu - Intergraph InterServe 9000 System Reference Manual

Keyboard Features Submenu
Table 10. Keyboard Features Submenu
Feature
Num Lock
Key Click
Keyboard auto-repeat rate
Keyboard auto-repeat delay

Advanced Menu

You can make the following selections on the Advanced Menu itself. Use the submenus for the
three other selections that appear on the Advanced Menu.
Table 11. Advanced Menu
Feature
Plug and Play Operating
System
Reset Configuration Data
PCI Configuration
I/O Device Configuration
Use Multiprocessor
Specification
Large Disk Access Mode
Pause Before Boot
Advanced Chipset Control
Choices
Auto
On
Off
Disabled
Enabled
30, 26.7, 21.8, 18.5, 13.3,
10, 6, or 2 per second
1/4 sec
1/2 sec
3/4 sec
1 sec
Choices Description
No Select Yes if you are booting a Plug and Play-capable
Yes operating system.
No Select Yes if you want to clear the system configuration
Yes data during next boot. System automatically resets to No
in next boot.
N/A Enters submenu.
N/A Enters submenu.
1.1 Selects the version of multiprocessor specification to use.
1.4 Some operating systems require version 1.1 for
compatibility reasons.
LBA Applies to IDE drives only; refers to the method used to
CHS access the drive.
Most operating systems use logical block addressing;
some use cylinder head sector (CHS). To verify correct
method, consult operating system documentation.
Enabled Enables five-second pause before booting operating
Disabled system.
N/A Enters submenu.
Description
Selects power on state for Num Lock.
Enables or disables key click.
Selects key repeat rate.
Selects delay before key repeat.
37