B Regulatory Specifications; Environmental Specifications; Fcc Declaration Of Conformity - Intergraph InterServe 9000 System Reference Manual

B Regulatory Specifications

Environmental Specifications

Table 58. Environmental Specifications
Temperature
Nonoperating
Operating
Humidity
Nonoperating
Operating wet bulb
Shock
Operating
Packaged
Acoustic noise
Electrostatic discharge
AC Input Power
100-120 V
200-240 V

FCC Declaration of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For questions related to electromagnetic compatibility performance of this product, contact:
Intergraph Computer Systems
Compliance Engineering
Huntsville AL 35894-001
Phone: Customer Care Center 1 (800) 763-0242
–40° to 70 °C (–55° to 150 °F)
10° to 35 °C (41° to 95 °F); derated 0.5 °C for every 1000 ft (305 m)
Altitude to 10,000 ft max; maximum rate of change = 10°C per hour
95% relative humidity (noncondensing) at 30 °C (86 °F)
Not to exceed 33 °C (91.4 °F) (with diskette drive or hard disk drive)
2.0 g, 11 msec, 1/2 sine
Operational after 30-inch free fall (cosmetic damage might occur)
< 47 dBA with one power supply at 28 °C +/- 2 °C
< 50 dBA with two power supplies at 28 °C +/- 2 °C
< 55 dBA with three power supplies at 28 °C +/- 2 °C
Tested to 20 kilovolts (kV) per Intel environmental test specifications; no
component damage
100-120 V , 7.6 A, 50/60 Hz
200-240 V , 3.8 A, 50/60 Hz
169