Lock Set Up Group; Table 19 Lock Set Up Group Parameters - Honeywell HercuLine 2000 Series Installation, Operation And Maintenance Manual

Lock Set Up Group

Table 19 lists the parameters and selections available for the SET LOCK group.
Actuator Lower
Display
Prompt
LOCKID
LOCK
MAENAB
Revision 7 HercuLine™ 2000 Series Actuator - Installation, Operation and Maintenance Manual
7/08

Table 19 Lock Set Up Group Parameters

Selections or
Range of Setting
0 to 4095 PASSWORD LOCK — 4-digit password can be selected to
provide security access to calibration information, set up
parameters and supervisory functions. Password can be a
number from 0 to 4095.
default = 0
LOCK OUT FEATURE — Selects lockout security for
calibration and supervisory functions, and set up groups.
None — No lockout of any calibration or set up groups. You
NONE
select and change set up group values, and perform field
calibration.
Calibration — Lockout for calibration groups SET CALINP,
CAL
SET CALMTR, SET CALOUT and CAL POSOUT only. You
can select and change set up group values.
Configuration — Lockout for calibration groups and set up
CONF
group configuration. You can only scroll through and view
set up group values.
Full — Lockout for calibration and all set up group values.
FULL
Only SET LOCK and READ STATUS groups are accessible.
default = NONE
Manual / Auto — Allows the ability to lockout mode changes
from the front panel.
Disabled — Disables the front panel auto / manual switch
DIS
functionality.
ENAB
Enabled — Enables the front panel auto / manual switch
default = ENAB
functionality.
Set Up and Calibration Procedures
Parameter Definition/PDA HercuLink
Lock Set Up Group
®
Prompt
53