Security Set Up Group - Honeywell UDC2800 Product Manual

Step Operation
4 Change the Value
or Selection
5 Enter the Value or
Selection
6 Exit Configuration

Security Set Up Group

Introduction
Security enables you to configure lockout, password, restore the
product, and we recommend that you configure this group last, after
all other configuration data has been loaded.
Press
Function key
Increment key or
Decrement key
Function key
Lower Display key
ATTENTION: Users must be careful while entering the
password as the password is not hidden.
ATTENTION: It is recommended to change the password after
each use.
Chapter 4 - Configuration
Result
that you want to change.
Enter in the value or selection of the
selected function prompt.
Increment or decrement the value or
selection that appears for the
selected function prompt.
You can press the Increment and
Decrement keys at the same time to
move the current editable digit one
step left.
Enter value or selection made into
memory.
Exit the set up mode, and returns to
the main screen.
58