Set Up Groups; Table 8 Set Up Groups - Honeywell HercuLine 2000 Series Installation, Operation And Maintenance Manual

Set Up and Calibration Procedures

Set Up Groups

Set Up Groups
Pressing the SET UP key on the keypad provides access to the various set up groups and allows you to set
up operating parameters, (such as input types and alarms), calibrate the actuator's inputs and outputs, set
communications, and check actuator status. Table 8 on the next page lists the set up groups that are
available by using the SET UP and FUNCTION keys on the keypad.
Set Up Group Title
SET
INPUT
SET
RELAYn
n = 1, 2, 3, or 4
SET
CUROUT
SET
COMM
SET
DIGINP
SET
DISPLA
CAL
INPUT
CAL
MOTOR
CAL
CURENT
SET
LOCK
READ
STATUS
SET
DRVINF
34 HercuLine™ 2000 Series Actuator - Installation, Operation and Maintenance Manual

Table 8 Set Up Groups

Pressing the FUNCTION Key Allows You to...
Select and set various parameters associated with the
input signal to the actuator.
Select relay functions. NOTE: Set Relay groups will
show on display only if relays are installed in the
actuator.
Select the output signal type of the actuator.
Select communication parameters for remote control of
actuator when connected to a SCADA system.
Select the parameters for external digital input states.
Select and set parameters for the local display.
Calibrate input zero and span values.
Calibrate zero and span values for motor operation.
ATTENTION
When calibrating the motor to a short stroke range,
you must reset the end-of-travel limit switches. See
Setting End-of-Travel Limit Switches.
Calibrate actuator output.
Set or change security password. Enable or disable
security access to set up parameters and calibration
set up.
Display operating and alarm status. Display self-test
diagnostic results.
Display and/or set various parameters specific to the
actuator.
For Details, See
Table 10
Table 13
Table 15
Table 16
Table 17
Table 18
Calibration
Procedure,
Table 25
Calibration
Procedure,
Table 26
Calibration
Procedure,
Table 27
Table 19
Table 20
Table 21
Revision 7
7/08