Introduction; Product Description - Honeywell HercuLine 2000 Series Installation, Operation And Maintenance Manual

Product Description

Honeywell's HercuLine
®
HercuLine 2001, HercuLine
actuators incorporating all of the high quality and reliable features of the traditional HercuLine series
actuators. These precision control and high reliability actuators ensure processes operate at maximum
efficiency, with minimal downtime, and lowest lifetime cost.
Honeywell's HercuLine
accurate positioning, and low maintenance (Figure 1). Designed for very precise positioning of dampers
and quarter turn valves the HercuLine
demanding environments requiring continuous-duty, high reliability, and low maintenance.
Model distinctions
®
HercuLine 2000 series actuators are used in applications requiring on/off or power to open/close position
proportional with 135 or 1000 ohm feedback.
®
HercuLine 2001 and 2002 are smart actuators used in applications requiring current proportional control
or digital control. They offer digital electronics providing for precision positioning control, easy set-up and
configuration, on board health monitoring, and network communications. Programming access is provided
through our HercuLink
communications or through the optional local keypad and display.
®
HercuLine 2002 smart actuators offer features and functions similar to the HercuLine
used for more severe service applications requiring features such as non-contact position sensing.
®
HercuLine 2003 actuators are unidirectional/ 360 degree rotation, special purpose actuators.
The keypad and display are available on the HercuLine
additional charge.
®
HercuLink Software
®
HercuLink Computer software enables access to programming and communication functions available as
standard with the HercuLine
display HMI. Using a Palm™ PDA, laptop PC or desktop computer, HercuLink
RS232/485 converter users may configure, calibrate, and access maintenance information locally or
remotely to the actuator.
Using HercuLink
access information to/from the actuators and to control the device. Set-up configurations may also be
stored on the computer for download to other HercuLine
PC in CSV format for use in preventative maintenance programs.
• Certified on Palm™ m125, m130, and m505.
• Compatible with Palm OS3.5 or higher.
• Compatible with Windows 2000 or XP operating systems
• Minimum system requirements:
• Windows 2000 (w/service pack 2), Windows NT (w/service pack 5), Windows ME, Windows XP
• 200 MHz Pentium with 64 Megs Ram
Revision 7 HercuLine™ 2000 Series Actuator - Installation, Operation and Maintenance Manual
7/08

Introduction

®
2000 series actuators are available in four versions: HercuLine
®
2002, and HercuLine
®
2000 series actuators are precision engineered for exceptional reliability,
®
2000 series actuators perform especially well in extremely
®
Palm PDA software connected to the actuator via a 232/485 converter, via HART
®
2001 and 2002 actuators without the added expense of the keypad &
®
software, the computer may be used as a master device over a Modbus network to
®
2003. All are low torque, precision electric rotary
® ®
2001 and HercuLine
®
devices. Information may be stored on the users
Introduction
Product Description
®
2000,
®
2001 and are
2002 products at
®
software, and a
1