Mylex Global Array Manager Installation Manual And User's Manual page 79

Finish Tab
When you get to the Finish screen (Figure 4-19), do the following:
Figure 4-19. Assisted Configuration ->New Configuration ->Finish
1. Examine the Configuration Summary for details about the
configuration that RAID Assist will set up.
2. If you want to start over, click the Welcome tab or Cancel button, OR
If you want to change your answers to any of the questions you were
asked, click the appropriate tab to return to that screen, OR
If you want to view the configuration before it is applied to the
controller, click the Details button. You will be taken to an equivalent
of the Disk Arrays page as shown in Manual Configuration, except that
you can only view and close the details window.
3. If you accept the configuration as presented, click the Apply button at
the Finish page to apply the new configuration to the controller.
A warning confirmation box appears as shown in Figure 4-20:
Manual No. SA67-0049-01
Configuration
4-21