Mylex Global Array Manager Installation Manual And User's Manual page 109

1. Check that the Log Information Viewer is displayed.
2. Determine which event you would like more information about (scroll
the Log Information Viewer if necessary), and double-click anywhere
along the event line (or double-click in the Event ID field).
An event information window for your selected event is displayed. An
example is shown in Figure 5-1:
A variety of information about the event is displayed to aid in
troubleshooting. The Event ID and Severity Level are displayed in the
window's titlebar. SOURCE, DEVICE ADDRESS, and
DESCRIPTION redisplay information from the original event line.
The most useful fields are:
• CAUSE. Possible reasons that the event occurred, and
• REQUIRED ACTION. What you should do in response to this
message. Informational messages will most likely have no required
actions. Critical, Serious, Error, and Warning messages may specify
useful required actions.
3. Click OK to close the event information window.
Manual No. SA67-0049-01
Figure 5-1. Event Information Window
Monitoring
5-3