Remove A Pager - Mylex Global Array Manager Installation Manual And User's Manual

Setting and Modifying User Preferences
• Select the appropriate button for a Numeric or Alphanumeric pager.
4. If you need to enter a Message Prefix, Suffix, or Delay interval, click
Advanced. Type the desired information and click OK to return to the
Pager setup box.
5. To test the pager using the settings you've input, click Test.
6. When you are satisfied with the Pager you've set up, click OK.
Your new Pager entry appears in the lower window of the Alarm Setup
dialog box. (Refer to Figure 3-20 for an example.)

Remove a Pager

1. Select the Pager alarm type in the upper window of Alarm Setup.
2. Select the Pager entry to remove in the lower window of Alarm Setup.
3. Click Remove.
A confirmation message is displayed as shown in Figure 3-22.
4. Click Yes to remove the Pager entry, or click No to keep the entry.
3-26
Figure 3-22. Remove Pager Entry Message
GAM Client User's Guide