Inter-Tel Standard Display Endpoint User Manual page 67

To store a number in a Speed-Dial location:
With the handset in the cradle, dial
1.
Dial the speed-dial location (0-9) you want to program.
2.
Enter the desired name for the speed-dial number, as described below:
3.
• Alphanumeric mode (Message button lit): Press the dialpad buttons to enter
the desired characters. (Refer to the chart on
a button is pressed determines which character is entered. For example,
533266 would enter "JEAN." When adjoining characters are located under
the same button, press
example, 66
spond to the letters printed on dialpad buttons 2-9.) Press
leave a space. Press
• Press
Dial the extension number or telephone number to be stored, as described below:
4.
• Numeric mode (Message button unlit): Enter the number.
NOTE:
includes an asterisk, pound, a hookflash (a quick hang up and release), or a
pause, press
hookflash, or four times for a pause. (Each pause or hookflash counts as one
digit.) You can enter more than one special character in a row by pressing
FWD
• Press
NOTE:
line, enter the Outgoing access code (default is
phone number.
To erase a Station Speed-Dial name and/or number:
With the handset in the cradle, dial
1.
Dial the desired location code (0-9) or press the desired Station Speed-Dial but-
2.
ton.
Press
3.
Press
4.
Press
5.
Press
6.
®
Inter-Tel Standard/Basic Endpoint User Guide
FWD
6667776 would enter "NORM." (Note that letters corre-
FWD
MUTE
to save the name.
#
You cannot use hyphens or colons in the number. If your number
∞
once for an asterisk, twice for a pound, three times for a
between the characters.
to save the number.
#
To dial outside telephone numbers without first selecting an outgoing
repeatedly until the name is erased.
MUTE
to continue.
#
repeatedly until the number is erased.
MUTE
to exit.
#
.
3 8 3
page 66.) The number of times
once to advance to the next character. For
if you need to backspace.
) before the outside tele-
8
.
3 3
8
twice to
FWD
55