Placing Calls On Hold; Call Waiting - Inter-Tel Standard Display Endpoint User Manual

Call Waiting

If you receive a call while you are already on another call, you will hear a "call wait-
ing" tone and/or you will see a display.
To respond to a waiting call (you hear a single tone and a button is flashing):
•
To end the current call: Hang up. The waiting call rings in.
•
To place the current call on hold: Press
to answer the waiting call.
•
To have the caller hear DND signals: Press
information about DND mode.)
P C
LACING ALLS
You can place calls on hold in one of two ways: individual or system.
•
Individual Hold places the call on hold at one endpoint. It can then be directly
picked up at that endpoint or it can be picked up at another endpoint using the
Call Pickup (Reverse Transfer) feature (see
•
System Hold places the call on hold in the system. You can then pick up the call
at any endpoint that has a flashing button for the call, including the endpoint that
placed it on hold.
NOTE:
You cannot place intercom calls on system hold.
To place a call on Individual Hold:
Press
1.
Hang up or place another call.
2.
To place an outside call on System Hold:
Press
1.
Hang up or place another call.
2.
To return to a call that is on hold:
Lift the handset and press the flashing button.
®
Inter-Tel Standard/Basic Endpoint User Guide
O H
N OLD
.
HOLD
∞
and dial
3 3
. Then press the flashing button
HOLD
DND
page 24).
.
5
. (See page 40 for more
21