Making And Receiving Calls; Intercom Calls - Inter-Tel Standard Display Endpoint User Manual

M R
AKING AND
Making and receiving calls is the basic purpose of any endpoint. With your Standard/
Basic endpoint you can make/receive intercom and outside calls and make emergency
calls.

Intercom Calls

Your extension number allows other people to place intercom calls to you, without
dialing any extra codes. And, because every endpoint in your telephone system is
assigned an extension number, you can call other people in your system quickly and
easily.
NOTE:
Ask your System Administrator for a list of extensions.
Placing Intercom Calls
To place an intercom call:
With or without the handset lifted, dial an extension number.
1.
If your call goes through handsfree to an endpoint's speaker, speak after you
2.
hear a double tone.
If you hear continuous ringing, wait for the call to be answered.
The telephone system allows you to place a non-handsfree call that will override
handsfree mode on the extension you are calling. If you use the Ring Intercom
Always feature to always send non-handsfree calls, the called party must pick up the
handset to answer the call.
To place a non-handsfree call that will ring at the other endpoint until answered:
Press before dialing the extension number.
#
To program your endpoint to always send non-handsfree calls using the Ring
Intercom Always feature:
With the handset in the cradle, dial
If there is no answer or if the endpoint is busy when you place an intercom call,
you can do any of the following:
•
To leave a station message: Press
•
To leave a voice mail message: Press
answer. (See
NOTE:
®
Inter-Tel Standard/Basic Endpoint User Guide
C
ECEIVING ALLS
3
page 31 for more message options.)
This option is only available if the called endpoint has a voice mailbox.
.The current status is shown.
7 7
and then hang up.
MSG
and wait for the message center to
MSG
17