Enabling Background Music; Changing Keymaps; Enabling Automatic Call Answer - Inter-Tel Standard Display Endpoint User Manual

Enabling Background Music

If your telephone system is equipped with a music source, you can listen to music
through your speaker.
To enable or disable background music:
Dial
3 1

Changing Keymaps

Keymaps identify where feature buttons appear on your endpoint. While all endpoints
are programmed with a standard keymap, some endpoints have alternate keymaps
(ask your system administrator). If you have an alternate keymap, you can switch
between the keymaps by dialing a specific feature code.
To switch between keymaps when your endpoint is idle:
With the handset in the cradle, dial
To switch between keymaps during a call:
∞
Press

Enabling Automatic Call Answer

The Automatic Call Answer feature determines whether or not you are automatically
connected to a caller when you lift the handset (or press
enabled, you are automatically connected when you go off-hook. If it is disabled, you
must first lift the handset (or press
To enable/disable this feature for ringing outside calls:
With the handset in the cradle, dial
To enable/disable this feature for ringing (non-handsfree) intercom calls:
With the handset in the cradle, dial
®
Inter-Tel Standard/Basic Endpoint User Guide
.
3
3
and dial .
3 9 9
SPKR
3
3
.
9 9
SPKR
) and then press the flashing button.
.
6 0
.
6
1
). If this feature is
45