Remote Feature Access - Inter-Tel Standard Display Endpoint User Manual

Remote Feature Access

To access your endpoint from another endpoint:
EITHER, Call your Direct Inward System Access number (provided by your
1.
system administrator). If required, enter your password.
OR, Use any endpoint on the system.
Enter
2.
Enter your extension number.
3.
Enter your password followed by
4.
tures.
To change the station password using Remote Programming:
Enter
a.
Enter the new password, followed by
b.
Enter the new password again for verification, followed by
c.
To turn on DND:
Enter
a.
Enter the message number (01-20) and enter the optional second-line mes-
b.
sage text.
To turn off DND: Enter
To turn on Call Forward:
Enter one of the following Call Forward feature codes.
a.
Enter an extension number or enter an outside line access code followed by a
b.
telephone number.
To turn off Call Forward: Enter
Hang up.
5.
70
.
3 5 9
.
3 9 2
.
3 7 0
3 7
.......................
All Calls
................
If No Answer
.........................
If Busy
.....
If No Answer or Busy
. You can now use any of the following fea-
#
.
#
.
1
3 5 5
3 5 6
3 5 7
3 5 8
.
3 5 5
®
Inter-Tel Standard/Basic Endpoint User Guide
.
#