Display - Inter-Tel Standard Display Endpoint User Manual

Display

Your Standard display endpoint has two lines of display with 16 characters per line.
When your endpoint is idle, this display shows your extension number, your user-
name, the time of day, and the date. At other times, it may display reminder messages,
Do-Not-Disturb (DND) messages, numbers dialed, call sources, elapsed time of calls,
current call costs, error messages, etc.
Because the display can only support 16 characters, you may see a few abbreviations.
The most commonly used abbreviations are provided in the table below.
NOTE:
The Basic digital endpoint does not have a display.
6
ABBREVIATION
ACCT CODE Account Code
CNF Conference
DEST Destination
DIR Directory
DND Do-Not-Disturb
EXT Extension
MSG Message
RCL Recall
SPKR Speaker
SPKRPHN Speakerphone
STN SPD Station Speed Dial
SYS SPD System Speed Dial
TFR Transfer
TG Trunk Group (a group of outside lines)
TRNK Trunk (an outside line)
WORD/PHRASE
®
Inter-Tel Standard/Basic Endpoint User Guide