Joining The Sub-Table (Only For The Long Table Type) - JUKI ASN-690 Instruction Manual

3-11. Joining the sub-table (only for the long table type)

CAUTION
:
Connect the sub-table to the main-body table taking care not to allow your fingers caught between
them.
4
2
Sub-table
Butting the sub-table and the main-body table with no clearance provided between them, fix clips 1 (at three
locatons) wth thumbscrews 2 . Lock casters 3 (at four locatons) to secure the sub-table.
A dfference n heght between the top face of the man-body table and that of the sub-table may be observed
on some nstallaton ste.
If such a dfference s observed, adjust so that the tables are same n heght wth spacers 4 for adjustng the
heght of the clps. (Three spacers are suppled.)
If the sub-table s lower than the man-body table :
・
Add the suppled spacer(s) approprately.
If the sub-table s hgher than the man-body table :
・
Remove spacer 4 and change wth a thnner one.
Main-body table
– 0 –
1
3