Table of Contents
Advertisement
!6 Setting of the start mode (level 2)
The start mode of the machne s set.
Ether the automatc mode by the start sensor or the manual mode by the startng pedal s selected.
!7 Curve mode setting (level 1)
Whether the curve sensor s used or not s selected.
!8 Curve differential feed mode setting (level 1)
Whether the dfferental feed mechansm s actvated or not by means of the curve sensor s selected.
.
!9 The number of stitches for starting the curve mode (level 1)
The number of sttches to be sewn before the curve mode or dfferental feed mode starts after the curve
sensor has detected a curved part of the materal s set.
.
@0 The number of stitches for ending the curve mode (level 1)
The number of sttches to be sewn from the start to the end of the curve mode or dfferental feed mode
s set.
.
@1 The number of stitches for sucking chain-off thread at the beginning of sewing (level 2)
The number of sttches for suckng chan-off thread at the begnnng of sewng s set.
@2 Curl blow output time (level 2)
The tme to be elapsed before turnng off the curl blow after the machne has stopped s set.
@3 Presser-foot lift waiting time (level 2)
The tme to be elapsed before lftng the presser foot after the machne has stopped s set.
(The presser foot automatcally goes up when the machne has stopped after stackng.)
0 : Manual mode (The start sensor s noperatve.)
: Automatc mode
(The startng pedal s used as the chan-off thread swtch.)
0 : Not used
: Used
0 : Not used
: Used
Settng range 0 to 999 sttches
Settng range 0 to 999 sttches
Settng range 0 to 999 sttches
Settng range 0 to 60 seconds
Settng range 0 to 9900 ms
– 7 –
Advertisement
Table of Contents
