7
In the case of an out-curve
4)
Once the materal has come out of the sensor,
5
the machne stops after several sttches. The
stacker operates when the stacker selector
swtch or stacker startng swtch 5 s depressed.
6
– 0 –
•
Do not place hands under the thread
trimmer presser in order to protect
against injury caused by trapping.
•
Do not place your face near the stacker
while it is in operation since air is blown
out from the stacker blower outlet 6 .
•
Do not place hands near receiving plate
7 of the stacker unit while the stacker
is in operation.
When sewing an out-curve part of the ma-
terial, support the material by hand since
seams easily slip off the material edge.