JUKI ASN-690 Instruction Manual page 14

To protect against possible personal injury or death, be sure to connect the tables while supporting
the machine by four or more workers.
If the dfference n heght between the sub-table and the man-body table cannot be elmnated wth spacer 4 ,
adjust the heght of the man-body table (or the heght of the sub-table).
5
To adjust the heght of the man-body table, loosen screws 5 that secure the casters (at sx locatons) to
adjust the heght of the man-body table to that of the sub-table and tghten the screws 5 .
To adjust the heght of the sub-table, loosen screws 5 that secure the casters (at sx locatons) to adjust the
heght of the sub-table to that of the man-body table and tghten the screws 5 .
Main-body table
5
5
–  –
Sub-table
5