Network Options; Default View Network Options Screen - HP MSL6000 Series User Manual

Table 6 View SCSI Options (continued)
Option
Data Transfer Speed
Report Element Type
Fast Terminate
Sequence

Network Options

Selecting this option lets you view the settings defined from the Network option in the Edit
Options area (see
NOTE: There are no firmware default settings for networks. Contact your network administrator for
specific information on connecting the library to your network.
Figure 50

Default view network options screen

NOTE: The IP Address, IP Mask, IP Gateway, and DNS Server become available after selecting
User Specified IP Address from the Network screen under Edit Options.
Description
Lets you set the robot or library SCSI data transfer rate to
Synchronous, 10 MB/sec, Synchronous, 5 MB/sec, or
Asynchronous Only. The default is Synchronous, 10
MB/sec.
The default is Disabled.
The default is Disabled.
Figure 50). Table 7 on page 68 lists and describes the available options.
MSL6000 series tape library user guide 67