Battery Charging - Led Behaviour; Troubleshooting; Network Link Unsuccessful; Neo Led Does Not Light When Docked - Psion Teklogix PX750 User Manual

Neo hand-held computer
Hide thumbs Also See for PX750:
Table of Contents

Advertisement

Chapter 6: Peripheral Devices & Accessories
Battery Charging – LED Behaviour
If a link is established between a NEO and a host, the application on the host and on the
hand-held must have a recovery mechanism in the event that NEO is removed from the dock
and the link is interrupted.
6.8.5
Battery Charging – LED Behaviour
Charge status is displayed on the hand-held LED. Refer to Table 6.3 on page 191 for
detailed LED charge behaviour. A NEO inserted in the quad dock requires 3 hours to
charge the battery to 75% capacity. Charge durations are independent of the number of
NEOs docked.
Note: The specified battery charge times are based on NEO being powered off. Additional
peripherals and other power consumption features will also alter the specified
charge time.
6.8.6

Troubleshooting

The indicators, applications and drivers required to use and monitor the docking station are
installed on NEO – no indicators or applications are present on the docking station itself.

6.8.6.1 Network Link Unsuccessful

If a network link fails, the application must take appropriate action.

6.8.6.2 NEO LED Does Not Light When Docked

Check that the quad docking station has power: Is the Power LED on the docking
station illuminated?
Try inserting NEO in another well in the quad dock.
Check for dirt or contamination on the docking contacts at the bottom of NEO. Wipe the
contacts with a damp cloth if necessary.
Check the connector pins inside the dock cradle for dirt. Gently wipe with a soft cloth if
they appear to be dirty or discoloured.
Check that the contacts are not bent or damaged.
Remove and reinsert NEO in the cradle.
Make certain that the battery installed in NEO is not defective.
6.9

Scanners And Imagers

NEO supports 1D laser scanner (SE955) and 1D imager (EV15) options to address a variety
of user application requirements. The scanner/imager installed in your unit can be config-
196
Psion Teklogix NEO Hand-Held Computer User Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neo px750Neo px750btNeo px750bt8

Table of Contents