Table of Contents
Advertisement
Chapter 9: Peripheral Devices & Accessories
Battery Charging–LED Behaviour
9.7.5 Battery Charging–LED Behaviour
The quad docking station supplies DC power to enable the WORKABOUT PRO
internal fast charger. Charge status is displayed on the hand-held LED
turns red while the battery is being charged and turns green once the charge is
complete. If the battery is fully charged when the unit is inserted in the docking
station, the LED flashes red for less than a second and then turns green. Battery
charging continues whether the WORKABOUT PRO is switched on or off.
It can take up to 5 hours to fully charge the internal battery.
9.7.6 Troubleshooting
The indicators, applications and drivers required to use and monitor the docking
station are installed on the WORKABOUT PRO
present on the docking station itself.
9.7.6.1
If a network link fails, the WORKABOUT PRO application alerts the operator that
the link was unsuccessful.
9.7.6.2
•
Check that the quad docking station has power
docking station illuminated?
•
Try inserting the WORKABOUT PRO in another well in the quad dock.
•
Check for dirt or contamination on the docking contacts at the bottom of the
WORKABOUT PRO. Wipe the contacts with a damp cloth if necessary.
•
Check the pogo pins inside the dock cradle for dirt. Gently wipe with a
damp cloth if they appear to be dirty or discoloured.
•
Check that the pogo pins are not bent or damaged.
•
Remove and reinsert the WORKABOUT PRO in the cradle, and check that
the latch is holding the unit in place (the pogo pins must be compressed for
proper contact).
•
Make certain that the battery installed in the WORKABOUT PRO is not
defective.
318
WORKABOUT PRO Hand-Held Computer With Windows Mobile 5.0 User Manual
Network Link Unsuccessful
Hand-Held LED Does Not Light When Docked
–
no indicators or applications are
–
is the Power LED on the
the LED
–
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
