Ean 8; Upc A; Upc E - Psion Teklogix PX750 User Manual

5.13.3.6 EAN 8

Enabled
Set this parameter to on to enable "EAN 8".
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Convert To EAN 13
If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.
Add/Remove Data
Refer to "Add/Remove Data" on page 142 for details.

5.13.3.7 UPC A

Enabled
Set this parameter to on to enable "UPC A" bar code scanning recognition.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Add/Remove Data
Refer to "Add/Remove Data" on page 142 for details.

5.13.3.8 UPC E

Enabled
Set this parameter to on to enable "UPC E".
Enable UPC-E1
Set this parameter to on to allow "UPC-E1" (zero suppressed) bar code scans.
Psion Teklogix NEO Hand-Held Computer User Manual
Chapter 5: Configuration
Decoded (ISCP)

EAN 8

157