Switching The Hand-Held On And Off - Psion Teklogix PX750 User Manual

Neo hand-held computer
Hide thumbs Also See for PX750:
Table of Contents

Advertisement

Chapter 3: Getting To Know NEO

Switching The Hand-Held On And Off

Cigarette Lighter Adaptor (Model No. PX3056) when used with a USB/DC Power
Adaptor (Model No. PX3054).
Desktop Docking Station (Model # PX3001)—operates as both a charger and a docking
station. Operating as a charger, both the battery installed in the hand-held and a spare
battery can be charged simultaneously.
Quad Docking Station—(Model # PX3004) can charge the battery of up to four NEOs
inserted in the docking station.
The charge time required to make the NEO ready for use varies depending on the type of
docking station used. A NEO inserted in docking station requires 3 hours to charge the
battery to 75% capacity. NEO is equipped with an intelligent charging system that protects
the battery from over-charging by terminating the charge process when the battery is at
maximum capacity.
Note: The specified battery charge times are based on NEO in suspend mode. Additional
peripherals and other power consumption features will alter the specified charge
time.
Note: Refer to "Monitoring The Battery And Maximizing Run Time" on page 40 for addi-
tional information about the battery.
Important: To avoid damaging the battery, the charge process will not begin until the
3.3

Switching The Hand-Held On And Off

To switch the unit on, press and hold down the [ENTER] key for at least one second.
When the LED flashes green, release the [ENTER] key.
The startup screen is displayed.
Note: If NEO is in suspend state, pressing [ENTER] 'wakes' the unit from this state. The
screen in which you were working before the computer entered suspend state is
displayed.
Switching Off NEO (Suspend)
Important: Keep in mind that turning off NEO does not result in a complete reboot;
30
Psion Teklogix NEO Hand-Held Computer User Manual
battery temperature is between 0°C to 45°C (32°F to 113°F).
rather, the unit enters a power-saving, "suspend" state. When the unit is
turned on from suspend state, operation resumes within a few seconds.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neo px750Neo px750btNeo px750bt8

Table of Contents