Add And Edit Trigger Mapping - Psion Teklogix PX750 User Manual

Chapter 5: Configuration
Manage Triggers

5.5.6.2 Add And Edit Trigger Mapping

These dialogs allow the user to add and edit trigger mappings.
Trigger Key
This drop-down list allows you to specify the source of the trigger events, such as the Ex-
pansion port trigger, Soft Scan and Scan for the trigger module selected.
Note: It is possible to map the same source to different modules (trigger consumers) – for
example, to both the Imager and Non-Decoded Scanner. If so, both devices/opera-
tions will occur simultaneously. This is not recommended in most cases, especially
with devices such as Imagers.
It is also possible to map different sources to the same module (trigger consumer).
100 Psion Teklogix NEO Hand-Held Computer User Manual