Psion Teklogix PX750 User Manual page 225

Note: Configure button – To change the settings in an existing network, highlight the net-
work you want to modify, and tap on the Configure button to display the Wireless
Properties dialog box.
Connect button – To force connection to a specific, existing network, highlight the
network to which you want your NEO to connect, and tap on the Connect button
Figure B.3 Wireless Information Tab
This tab lists available networks – any access points that are broadcasting an SSID, and it
lists preferred networks – networks that you have configured. Since access points are gener-
ally secure, they will most likely not be listed here. By default, NEO attempts to connect to
preferred networks. This behaviour can be changed by enabling Automatically connect to
non-preferred networks in the Advanced dialog box (see Figure B.5).
• To add a new configuration, tap on the Add New button. A blank Wireless Properties
dialog box is displayed.
• Wireless Properties Tab: Type the appropriate SSID (Service Set Identifier) in the
Network name (SSID): dialog box. The Network name field can contain a maximum
of 32 characters. The name assigned here is listed as a preferred network.
Psion Teklogix NEO Hand-Held Computer User Manual
Appendix B: Wireless Zero Config
Wireless Information
B-3