Psion Teklogix PX750 User Manual page 89

• In the Display Properties dialog box, open the Backlight tab.
Note: Backlight changes take effect immediately. You do not need to reset the unit.
To maximize battery run time, keep the display backlight brightness and active
durations as low as possible.
Intensity
This parameter is used to adjust the light intensity of the backlight. Sliding the bar to the left
lowers the light intensity, and sliding it to the right raises the intensity.You can also adjust
the backlight directly from the keyboard by pressing [FN/BLUE] followed by the [LEFT] or
[RIGHT] arrow keys to increase or decrease the backlight intensity.
Bright For
The value chosen from this drop-down menu determines the duration of time that the back-
light stays on at the configured intensity after the last user action (keypress, scan trigger).
Dim For
The value chosen from this drop-down menu determines the duration of time that the back-
light stays on at half the configured intensity (dimmed backlight) after expiration of the
Bright For delay and as long as no user action takes place (such as a keypress or scan trig-
ger). At the expiration of the Dim For duration, the display backlight shuts off.
Psion Teklogix NEO Hand-Held Computer User Manual
Chapter 5: Configuration
Display Properties
77