Chapter 2: Basic Checkout; Preparing The Workabout Pro For Operation; The Main Battery; Charging The Main Battery - Psion Teklogix WORKABOUT PRO 7527 C G2 User Manual

Hand-held computer with windows ce 5.0

Hide thumbs

Table Of Contents

Table of Contents

2.1 Preparing The WORKABOUT PRO For Operation

2.1.1 The Main Battery

Warning:

Before charging the battery, it is critical that you review the battery

safety guidelines in the "WORKABOUT PRO Hand-Held Com-

puter Warranty & Regulatory Guide", PN 8000126.

The WORKABOUT PRO C and WORKABOUT PRO S can be powered with one

of the following lithium-ion battery packs:

•

High-Capacity – Model No. WA3006, and

•

Super High-Capacity – Model No. WA3010

2.1.1.1

Charging The Main Battery

Important:

Before opening the battery cover on your WORKABOUT PRO,

press [FN/BLUE] [ENTER] to turn off the hand-held. When the

battery cover is removed, a power-off switch is automatically acti-

vated and the unit power is switched off; if the battery cover is

opened while the hand-held is still powered on, the unit may

reboot.

Battery packs shipped from the factory are charged to approximately 40% and must

be fully charged prior to use. Batteries can be charged using a variety of chargers

and docking stations along with a WORKABOUT PRO internal charger. When

using the internal charger, a suitable power source is required. All chargers and

docking stations are described in Chapter 6: Peripheral Devices & Accessories

beginning on page 205.

Note: If you are powering up a new unit, a warning message may appear on the

screen indicating that the backup battery capacity is low. To recharge the

internal battery, you must fully charge the WORKABOUT PRO with the

main battery installed in the unit.

WORKABOUT PRO Hand-Held Computer With Windows CE 5.0 User Manual

Preparing The WORKABOUT PRO For Operation