Audio Indicators - Psion Teklogix PX750 User Manual

Keep in mind that the application running on NEO can dictate how the LED operates.
Review the documentation provided with your application to determine LED behaviour.
The scanner also overrides LED behaviour. The table below describes what the various LED
colours indicator when a scan is activated – a scanner button is pressed or the scanner trigger
is pulled.
Table 3.1 NEO Scanner LED Behaviour
LED Behaviour
Solid Red
Blinking Red
Solid Green
Note: During the first two minutes of a battery charge, the LED remains solid yellow
while the hand-held computer status is assessed.
If the unit is attached to an external power supply, the hand-held LED reflects the battery
charge status.
Table 3.2 NEO Charge LED Behaviour
LED Behaviour
Solid Yellow
Flashing Green
Solid Green
Flashing Yellow
Solid Red
3.6.2

Audio Indicators

The audio receiver provides a variety of sounds when a key is pressed, a keyboard character
is rejected, scan input is accepted or rejected, an operator's entry does not match in a match
field or the battery is low. To specify how you want your NEO to respond under various con-
ditions, refer to "Volume And Sound Properties" on page 90.
Indicates the scanner is firing.
Unsuccessful decode.
Successful decode.
Battery charged to less than 75% capacity.
Battery charged to between 75% and 95% of capacity.
Fully charged.
Temperature outside charge range (0°C to 45°C).
Battery is not charging. Battery fault warning.
Psion Teklogix NEO Hand-Held Computer User Manual
Chapter 3: Getting To Know NEO
Scan Status
Charge Status

Audio Indicators

37