Belt Clip Installation - Psion Teklogix PX750 User Manual

Chapter 6: Peripheral Devices & Accessories

Belt Clip Installation

• Pull up the velcro clasp to adjust the hand strap to fit your hand as required.
Note: In addition to the hand strap, the lanyard with quick release buckle is also used to
attach the wrist strap (shipped with the hand-held) and the optional shoulder strap to
NEO.
6.1.2

Belt Clip Installation

Figure 6.4 Belt Clip Installation Kit
• Position the belt clip adaptor plate so that the thicker, folded end aligns with the
angled scanner section on the back of NEO as illustrated in Figure 6.5.
180 Psion Teklogix NEO Hand-Held Computer User Manual
6
Belt Clip
Adaptor Plate
Belt Clip attached here
Foam Pad under
Folded End
Stylus Holder
Screw M2 x 6
Metal Eyelet
Metal Insert
On NEO Unit